American Standard Colony pro Series Installation Instructions

For use with shower heads rated at 4.9 L/min (1.3 gpm) or higher.

RECOMMENDED TOOLS

Plumbers' Putty

or Caulking

ROUGHING-IN DIMENSIONS

• To assure proper positioning in relation to wall.

Note roughing-in dimensions.

FINISHED WALL

74" (1879 mm)

TOP OF TUB RIM

BOTTOM OF TUB

Product names listed herein are trademarks of AS America, Inc.

© AS America, Inc. 2018

Phillips Screwdriver

Teflon Tape

Flat Blade Screwdriver

(51 TO 76 mm)

OPTIONAL TO FINISHED

FLOOR USUALLY

BETWEEN 65'' AND 78"

(1651 AND 1981 mm)

2-3/4" MAX. (69 mm)

1-3/4" MIN. (45 mm)

FOR SLIP-ON

INSTALLATION

INSTRUCTIONS

TU075507XH

TU075508XH

Adjustable Wrench

CARTRIDGE INSTALLATION

• Remove PLASTER GUARD (6)

(Keep it installed for thin wall Installation).

• Remove BONNET NUT (1) by unthreading it

Counter clockwise. Remove test CAP (2).

• Remove PROTECTIVE HOUSING (3) from

CARTRIDGE (4). Install with "UP" text on top.

• Reinstall BONNET NUT (1) onto VALVE BODY (5)

and tighten firmly with 12 Nm or 9 lbs/ft.

NOTE: Specified tightening torque

of BONNET NUT (1) is critical to

assure sealing function.

Channel Locks

M965931 Rev. 1.0 (12/18)

Related Manuals for American Standard Colony pro Series

Single control centerset lavatory faucet (20 pages)

Pro pressure balancing bath and shower trim kit (22 pages)

Space saving elongated toilet (1 page)

American standard colony, compact, renaissance, renaissance rf total toilet, renaissance el total toilet installation instruction (5 pages)

For two-piece toilets with aquameter fill valve (4 pages)

American standard connoisseur single control kitchen combi faucet installation instructions (4 pages)

Countertop bathroom sink (2 pages)

American standard bathroom aids user manual (10 pages)

Bidet faucet and transfer valve with speedconnect drain (6 pages)

American standard bidet faucet and transfer valve installation intsructions (6 pages)

Two-handle centerset lavatory faucet (2 pages)

American standard pressure balancing bath and shower trim kits installation instructions (4 pages)

Freestanding single control bath filler (15 pages)

Summary of Contents for American Standard Colony pro Series

• Page 1 TU075507 Pressure Balancing TU075508 Bath and Shower Trim Kit TU075507XH Thank you for selecting American Standard. TU075508XH the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
• Page 2 STANDARD WALL INSTALLATION • Figure 1. Remove plaster guard from valve. Push CAP (1) over VALVE CARTRIDGE (2) until seated against stop. • Figure 2. Push ESCUTCHEON (3) onto CAP (1) and attach to valve body with LONG SCREWS (4). THIN WALL INSTALLATION •.
• Page 3 ADJUST HOT LIMIT STOP • By restricting HANDLE rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP (1) reduces risk of accidental scalding. To set the maximum hot water temperature of your faucet valve, adjust the setting on the HOT LIMIT SAFETY STOP (1).
• Page 4 Colony ® Pressure Balancing Bath and Shower Trim Kit MODEL NUMBER TU075500 TU075507 M970179-YYY0A TU075508 SHOWER ARM & FLANGE TU075507XH TU075508XH PURCHASE SEPARATELY Replace the “YYY” with 1660512.YYY SHOWER HEAD appropriate finish code POLISHED CHROME LEGACY BRONZE BRUSHED NICKEL 078016-YYY0A CARTRIDGE SCREW M970640-0070A BACK-TO-BACK.